| View previous topic :: View next topic |
| Author |
Message |
francis
Joined: 29 Oct 2007
Posts: 4
Location: Jordan
|
 Posted: Fri Feb 29, 2008 11:49 am Post subject: PMC DR installation |
 |
|
Hi,
I found that some PCs with windows XP operating system and have all the necessary stated requirements, does not recognize the Digital receiver Module during the installation process. The PCI adapter card is the only one which is recognized and appears as Jungo/IIWdrvr6 under system manger menu. So, what could be the reason for such a case?
Thanks.
Francis |
|
| Back to top |
|
 |
jhenderson
Site Admin
Joined: 07 Mar 2006
Posts: 1177
Location: So. Cal. USA
|
| Posted: Tue Mar 04, 2008 11:11 am Post subject: PCI incompatibilities |
|
|
Rarely, non-compliant PCI systems cause problems such as this. Unless the unit is shipped to Innovative for analysis, we can only speculate as to the cause.
Be sure that the slot into which you have installed the DR and adapter is not being configured by the BIOS for clock speeds in excess of 66 MHz or widths greater than 64-bits. Some BIOSes assume that cards can operate as PCI-X devices at clock speeds beyond 66 MHz.
_________________
Jim |
|
| Back to top |
|
|
|
