amane
Site Admin
Joined: 17 Apr 2006
Posts: 86
Location: Simi Valley
|
 Posted: Wed Nov 29, 2006 11:14 am Post subject: external clock source |
 |
|
Hi All:
THE UWB external clock is capable of accepting following signals .
VIH (input high voltage) = 2 (Min) , 3.6(Max)
VIL (input low voltage) = -0.3(Min), 0.7(Max)
Input frequency max = 250 MHz
Input should be from a 50 ohm source.
Some customers are curious about using sine wave at input instaed of square wave. Only thing I would say regarding this in the stability and jitter of the clock generated by using sine wave wont be as good as a stable square wave input.
Amit Mane
System Engineer
Innovative Integration
amane@innovative-dsp.com
|
|
