| View previous topic :: View next topic |
| Author |
Message |
ARNAUD
Distributor
Joined: 23 Jan 2009
Posts: 81
Location: FRANCE
|
 Posted: Tue Dec 08, 2009 8:15 am Post subject: Unable to restore SBC6713 |
 |
|
Dear Support,
I received SBC-6713e from a customer and today this board is completely non operational. I am not able to access at the board with network or JTAG.
I tried to restore SBC6713 without success
I followed this topis: http://www.iidsp.com/forum/viewtopic.php?t=546
I modified some path in the ccs file.
You can find enclosed ccs file and error with CCS3.1.
There is another topic about this problem (http://www.iidsp.com/forum/viewtopic.php?t=385). I followed also this topic without succes.
To conclude, I am not cable to connect to SBC6713 with JTAG.
Please let me know.
_________________
Best Regards,
Arnaud |
|
| Back to top |
|
 |
jhenderson
Site Admin
Joined: 07 Mar 2006
Posts: 1178
Location: So. Cal. USA
|
| Posted: Tue Dec 08, 2009 11:48 am Post subject: |
|
|
| It would be best to return this to Innovative under RMA. If you have followed the procedure to restore the Flash image without success, then perhaps the board has been damaged. Contact Peg Todd to obtain an RMA. |
|
| Back to top |
|
|
|
